Pro Audio

HF Products & Components

Spec Sheet


A 25 watt driver and die cast horn combination optimized specifically for bass guitar applications.

Suggested Retail  $64.99
Your Price  $44.99

For contiguous USA shipments only.

  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
Speaker Detail
Throat Size1", 25.4mm
Power Rating25W (AES)
Nominal impedance8 Ω
Minimum impedance8.6 Ω @ 7.4 kHz
Sensitivity105.2 dB
Resonance1.3 kHz
Usable Frequency Range2500 Hz – 20 kHz
Low Rec. Crossover2.5 kHz
W x H x D (in)4.2" x 4.2" x 4.8"
W x H x D (mm)106.7 x 106.7 x 121.9mm
Cut Out3.5 in., 88.9 mm
Weight2.2lbs, 1kg

Multiple units exceed published ratings evaluated under EIA 426A specification while tested in a free-air, non-temperature-controlled environment. Multiple compression drivers exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-controlled environment.

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Compression drivers were tested using a 2ft x 2ft baffle built into the wall with horn front mounted.

BETA 8CX, 10CX and 12CX are coaxial speakers with tweeter sold separately. The data for these coaxial woofers was calculated with the ASD:1001 driver screwed into the woofer, but not active.

Prices, specifications and product cosmetics are subject to change without notice.