Pro Audio
Tour Grade
NSW4018-8
18-inch Tour Grade - American Muscle Advanced FEA optimization tools were implemented on this next generation of touring grade worthy subwoofers by Eminence. The result is an extremely long throw, lightweight, and exceptionally high power handling driver with top notch performance in small to large vented enclosures.
Suggested Retail $629.99
Your Price $579.99
For contiguous USA shipments only.
- Free Tech Support
- 7-Year Warranty*
| Specification | |
| Nominal Basket Diameter | 18", 457 mm |
| Nominal Impedance* | 8 Ω |
| Power Rating* | |
| Program Power | 3200 W |
| Watts | 1600 W |
| Resonance | 36 Hz |
| Usable Frequency Range | 27 Hz - 1.3 kHz |
| Sensitivity* | 96.6 dB |
| Magnet Weight | 33 oz. |
| Gap Height | 0.5", 12.7 mm |
| Voice Coil Diameter | 4", 102 mm |
| Thiele & Small Parameters | |
| Resonant Frequency (fs) | 36 Hz |
| DC Resistance (Re) | 5.86 Ω |
| Coil Inductance (Le) | 1.54m H |
| Mechanical Q (Qms) | 8.46 |
| Electromagnetic Q (Qes) | 0.39 |
| Total Q (Qts) | 0.38 |
| Compliance Equivalent Volume (Vas) | 164.49 liters / 5.81 cu.ft. |
| Peak Diaphragm Displacement Volume (Vd) | 1851.1 cc |
| Mechanical Compliance of Suspension (Cms) | 0.08 mm/N |
| BL Product (BL) | 28.24 T-M |
| Diaphragm Mass Inc. Airload (MMs) | 237 grams |
| Efficiency Bandwidth Product (EBP) | 91 |
| Maximum Linear Excursion (Xmax) | 15.21 mm |
| Surface Area of Cone (Sd) | 1217 cm2 |
| Maximum Mechanical Limit (Xlim) | 31.5 mm |
| Mounting Information | |
| Recommended Enclosure Volume | |
| Sealed | N/a |
| Vented | 99.11-339.80 liters / 3.50-12.00 cu.ft. |
| Driver Volume Displaced | 0.205 cu.ft. / 5.81 liters |
| Overall Diameter | 18.13", 460.5 mm |
| Baffle Hole Diameter | 16.6", 421.6 mm |
| Front Sealing Gasket | YES |
| Rear Sealing Gasket | N/A |
| Mounting Holes Diameter | 0.28", 7.1mm |
| Mounting Holes B.C.D. | 17.32", 439.9mm |
| Depth | 8.9", 226.1 mm |
| Net Weight | 20.9 lbs, 9.48 kg |
| Shipping Weight | 23.4 lbs, 10.61 kgs |
| Materials of Construction | |
| Coil Construction | I/O Copper voice coil |
| Coil Former | Fiberglass former |
| Magnet Composition | Neodymium magnet |
| Core Details | Vented motor |
| Basket Materials | Die-cast aluminum basket |
| Cone Composition | X5 cone pulp |
| Cone Edge Composition | Advanced Polycotton surround |
| Dust Cap Composition | X5 dust cap pulp |
Footnotes
Multiple units exceed published ratings evaluated under EIA 426A specification while tested in a free-air, non-temperature-controlled environment. Multiple compression drivers exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-controlled environment.
The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Compression drivers were tested using a 2ft x 2ft baffle built into the wall with horn front mounted.
BETA 8CX, 10CX and 12CX are coaxial speakers with tweeter sold separately. The data for these coaxial woofers was calculated with the ASD:1001 driver screwed into the woofer, but not active.
Prices, specifications and product cosmetics are subject to change without notice.
