Pro Audio

HF Products & Components

Spec Sheet

APT:30

The Eminence APT30 horn loaded tweeter offers exceptional high frequency reproduction at an exceptional value. Rated at 10 watts AES, this ultra-compact unit features a 2 oz. ferrite magnet, aluminum voice coil former, and mylar diaphragm. With an average SPL rating of 93.4 dB and a max SPL of 116.5 dB, the APT30 is designed to deliver big performance in very limited spaces. From small bass rigs to home hi-fi applications, the APT30 can go where other devices simply can't.

Suggested Retail  $34.99
Your Price  $14.99

For contiguous USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
Supertweeters
Speaker Detail
Specification
TypeConical
Throat Size1", 25.4mm
Dispersion80° conical
Power Rating10 W
Nominal impedance
Minimum impedance7.5 Ω @ 5 kHz
Sensitivity93.4 dB
Resonance2.2 kHz
Usable Frequency Range3500 Hz – 20 kHz
Low Rec. Crossover3.5 kHz
W x H x D (in)2.61" x 2.61" x 1.78"
W x H x D (mm)66.2 x 66.2 x 45.2mm
Cut Out2.31x2.31, 59x59
Weight0.4lbs, 0.18kg
MaterialABS
Hide
Footnotes

Multiple units exceed published ratings evaluated under EIA 426A specification while tested in a free-air, non-temperature-controlled environment. Multiple compression drivers exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-controlled environment.

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Compression drivers were tested using a 2ft x 2ft baffle built into the wall with horn front mounted.

BETA 8CX, 10CX and 12CX are coaxial speakers with tweeter sold separately. The data for these coaxial woofers was calculated with the ASD:1001 driver screwed into the woofer, but not active.

Prices, specifications and product cosmetics are subject to change without notice.