Pro Audio

Professional Series

Get Adobe Reader Cab Design Spec Sheet

PRO 5W-8

Small in size, large in performance. Featuring an advanced X5? pulp cone, high temperature copper wire voice coil, and truncated cast frame chassis, the Pro 5W can handle your most demanding midbass, midrange, line array, or column array applications.

Suggested Retail  $64.99
Your Price  $59.99

For contiguous USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
This table charts the specifications for the PRO 5W-8 speaker
Speaker Detail
Specification
Nominal Basket Diameter5", 127 mm
Nominal Impedance*8 Ω
Power Rating*
Program Power150 W
Watts75 W
Resonance95 Hz
Usable Frequency Range120 Hz - 7.5 kHz
Sensitivity*91.1 dB
Magnet Weight15 oz.
Gap Height0.31", 8 mm
Voice Coil Diameter1", 25 mm
Thiele & Small Parameters
Resonant Frequency (fs)95 Hz
DC Resistance (Re)5.43 Ω
Coil Inductance (Le)0.28m H
Mechanical Q (Qms)3.35
Electromagnetic Q (Qes)0.35
Total Q (Qts)0.32
Compliance Equivalent Volume (Vas)4.31 liters / 0.15 cu.ft.
Peak Diaphragm Displacement Volume (Vd)19.7 cc
Mechanical Compliance of Suspension (Cms)0.7 mm/N
BL Product (BL)6.11 T-M
Diaphragm Mass Inc. Airload (MMs)4 grams
Efficiency Bandwidth Product (EBP)271
Maximum Linear Excursion (Xmax)2.95 mm
Surface Area of Cone (Sd)66.6 cm2
Maximum Mechanical Limit (Xlim)6 mm
Mounting Information
Recommended Enclosure Volume
Sealed 1.98-3.11 liters / 0.07-0.11 cu.ft.
Vented 2.55-4.81 liters / 0.09-0.17 cu.ft.
Driver Volume Displaced0.013 cu.ft. / 0.36 liters
Overall Diameter5.25", 133.4 mm
Baffle Hole Diameter4.28", 108.7 mm
Front Sealing GasketYes
Rear Sealing GasketYes
Mounting Holes Diameter0.13", 3.2mm
Mounting Holes B.C.D.4.79", 121.7mm
Depth2.5", 63.5 mm
Net Weight2.9 lbs, 1.32 kg
Shipping Weight3.3 lbs, 1.5 kgs
Materials of Construction
Coil ConstructionCopper voice coil
Coil FormerKapton former
Magnet CompositionFerrite magnet
Core DetailsVented and extended core
  
Basket MaterialsDie-cast aluminum basket
Cone CompositionX5? Pulp cone
Cone Edge CompositionCloth cone edge
Dust Cap CompositionTreated paper dust cap
Hide
Footnotes

Multiple units exceed published ratings evaluated under EIA 426A specification while tested in a free-air, non-temperature-controlled environment. Multiple compression drivers exceeded published ratings evaluated under EIA-426A or AES specification while mounted on Eminence’s H290, H290S, or H2EA horn in a non-temperature-controlled environment.

The average output across the usable frequency range when applying 1W/1m into the nominal impedance. i.e: 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2 ft. x 2 ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Yamaha P3500S amplifier | 2700 cu. ft. chamber with fiberglass on all six surfaces (three with custom-made wedges). Compression drivers were tested using a 2ft x 2ft baffle built into the wall with horn front mounted.

BETA 8CX, 10CX and 12CX are coaxial speakers with tweeter sold separately. The data for these coaxial woofers was calculated with the ASD:1001 driver screwed into the woofer, but not active.

Prices, specifications and product cosmetics are subject to change without notice.