Pro Audio
HF Products & Components
APT 150S
| Specification | |
| Type | Constant Directivity |
| Throat Size | 1", 25.4mm |
| Dispersion | 100 x 50 |
| Low Rec. Crossover | 1.5kHz |
| Material | ABS |
| WxHxD (in) | 4.49" x 7.55" x 3.18" |
| WxHxD (mm) | 114mm x 191.7mm x 80.7mm |
| Cut Out | 3.4x6.7", 86x170mm |
| Weight | 0.27lbs, 124g |
Footnotes
* Please consult www.eminence.com for specifications of models with alternative impedances.
** Multiple units exceed published rating evaluated under EIA 426A noise source and test standard while in a free-air, non-temperature controlled environment.
*** The average output across the usable frequency range when applying 1W/1M into the nominal impedance. Ie: 2.83V/8ohms, 4V/16ohms. Eminence response curves are measured under the following conditions: All speakers are tested at 1w/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25 supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft. X 2ft. baffle is built into the wall with the speaker mounted flush against a steel ring for minimum diffraction | Hafler P1500 Trans-Nova amplifier | 2700 cu.ft. chamber with fiberglass on all six surfaces (three with custom-made wedges).
**** BETA 8CX, 10CX, 12CX and ACOUSTINATOR© CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
***** Multiple units exceeded published rating evaluated under AES 500 and AES 800 noise sources and test standards while mounted on Eminence's TI-2000 horn in a nontemperature-controlled environment.
****** BETA 8CX, 10CX, 12CX and ACOUSTINATOR© CX2008 are coaxial speakers with tweeter sold separately. Published Usable Frequency response contingent upon use of APT 50 HF Driver.
