Pro Audio

HF Products & Components

Spec Sheet


Suggested Retail  $209.99
Your Price  $199.99

For continental USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Throat Size2.00", 50.80mm
Nominal Impedance*16.Ω
Minimum Impedance13.4 ohm @ 3.6 kHz
Power Rating**100 W (AES)
Usable Frequency Range800.0Hz-20kHz
Recommended Crossover800 Hz / 12 dBkHz
Magnet MaterialFerrite
Magnet Weight80.00oz, 2.27kg
Voice Coil Diameter3.0" / 76.20mm
Voice Coil FormerPolyimide
Diaphragm MaterialTitanium w/ geodesic ribs for increased stiffness and break-up control.
DC Resistance (Re)10.00Ω
Mounting Information
Overall Diameter7.90", 200.70mm
Driver Volume Displaced0.04 cu.ft., 1.36 liters
Depth3.10", 78.70mm
Weight13.20 lbs, 6.00 kg
Mounting ThreadN/A
Mounting Holes Diameter4X 1/4-20
Mounting Holes B.C.D.4 in. 101.6 mm

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).