Pro Audio

HF Products & Components

Spec Sheet


Suggested Retail  $84.99
Your Price  $79.99

For continental USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Throat Size1.00", 25.40mm
Nominal Impedance*8.0Ω
Minimum Impedance8.1 ohm @ 5.0 kHz
Power Rating**85 W (AES)
Usable Frequency Range1500.Hz-20kHz
Recommended Crossover1.5 kHz / 12 dBkHz
Magnet MaterialFerrite
Magnet Weight34.00oz, 0.96kg
Voice Coil Diameter2.0" / 50.80mm
Voice Coil FormerPolymide
Diaphragm MaterialTitanium
DC Resistance (Re)6.80Ω
Mounting Information
Overall Diameter5.25", 133.40mm
Driver Volume Displaced0.01 cu.ft., 0.50 liters
Depth2.30", 58.40mm
Weight5.60 lbs, 2.50 kg
Mounting Thread1 3/8 in. 18 ext.
Mounting Holes DiameterN/A
Mounting Holes B.C.D.N/A

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).