Pro Audio

HF Products & Components

Spec Sheet


Suggested Retail  $69.99
Your Price  $64.99

For continental USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Throat Size1.00", 25.40mm
Nominal Impedance*16.Ω
Minimum Impedance14.8 ohm @ 2.9 kHz
Power Rating**80 W (EIA-426A)
Usable Frequency Range1200.Hz-20kHz
Recommended Crossover1.2 kHz / 18 dBkHz
Magnet MaterialFerrite
Magnet Weight34.00oz, 0.96kg
Voice Coil Diameter2.0" / 50.80mm
Voice Coil FormerPolyimide
Diaphragm MaterialTitanium
DC Resistance (Re)11.90Ω
Mounting Information
Overall Diameter5.25", 133.40mm
Driver Volume Displaced0.01 cu.ft., 0.50 liters
Depth2.20", 55.90mm
Weight4.70 lbs, 2.10 kg
Mounting Thread1 3/8 in. 18 ext.
Mounting Holes DiameterN/A
Mounting Holes B.C.D.N/A

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).