Pro Audio

HF Products & Components

Spec Sheet

PSD:2002-16

Suggested Retail  $64.99
Your Price  $59.99

For continental USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Specification
Throat Size1", 25.4mm
Nominal Impedance*16Ω
Minimum Impedance14.8 ohm @ 3.3 kHz Ω
Power Rating**80 W (EIA-426A)
Resonance0.58kHz
Usable Frequency Range1200Hz-20kHz
Recommended Crossover1.2 kHz / 18 dBkHz
Sensitivity***105.8
Magnet MaterialFerrite
Magnet Weight34oz, 0.96kg
Voice Coil Diameter2" / 51mm
Voice Coil FormerPolyimide
Diaphragm MaterialTitanium
DC Resistance (Re)11.9Ω
Mounting Information
Overall Diameter5.25", 133.4mm
Driver Volume Displaced0.018 cu.ft., 0.5 liters
Depth2.2", 55.9mm
Weight5 lbs, 2.3 kg
Mounting ThreadN/A
Mounting Holes Diameter2X 1/4-20 or 3x M6
Mounting Holes B.C.D.3 in. 76.2 mm or 2.25 57.
Hide
Footnotes

* Please consult www.eminence.com for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).