Pro Audio

HF Products & Components


Find a Dealer This table charts the specifications for the NSD:2005S-16 speaker
Speaker Detail
Throat Size1", 25.4mm
Nominal Impedance*16 ohms
Power Rating**50W (AES)
Free Air Resonace0.57kHz
Usable Frequency Range1500Hz-20kHz
Magnet Weight4oz, 0.11kg
Voice Coil Diameter2" / 51mm
Thiele & Small Parameters
DC Resistance (Re)6.8
Mounting Info
Overall Diameter3.87", 98.3mm
Mounting Holes DiameterN/A
Mounting Holes B.C.D.N/A
Mounting Thread1 3/8 in. 18 ext.
Depth1.75", 44.5mm
Weight2 lbs, 0.91 kg
Volume13.63 ", 0.22 liters
Materials of Construction
Diaphragm MaterialTitanium
Magnet CompositionNeodymium

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).