Car Audio

HF Products & Components

Spec Sheet

EM:50

Suggested Retail  $34.99
Your Price  $29.99

For continental USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Specification
Throat Size1", 25.4mm
Nominal Impedance*
Minimum Impedance7.4 ohm @ 6.1 kHz Ω
Power Rating**35 W (AES)
Resonance2.1kHz
Usable Frequency Range3500Hz-20kHz
Recommended Crossover3.5 kHz / 12 dBkHz
Sensitivity***104.7
Magnet MaterialFerrite
Magnet Weight8oz, 0.23kg
Voice Coil Diameter1" / 25mm
Voice Coil FormerKapton
Diaphragm MaterialPhenolic
DC Resistance (Re)6.3Ω
Mounting Information
Overall Diameter2.75", 69.9mm
Driver Volume Displaced0.004 cu.ft., 0.12 liters
Depth2.53", 64.3mm
Weight1.7 lbs, 0.8 kg
Mounting Thread1 3/8 in. 18 ext.
Mounting Holes DiameterN/A
Mounting Holes B.C.D.N/A
Hide
Footnotes

* Please consult www.eminence.com for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).