Pro Audio

HF Products & Components

Spec Sheet


response graph

Click to enlarge.

Suggested Retail  $34.99
Your Price  $29.99

For contiguous USA shipments only.

  • Free Shipping
  • Free Tech Support
  • 7-Year Warranty*
*Warranty policy may vary outside the USA.
High frequency driver specifications
Speaker Detail
Throat Size1", 25.4mm
Nominal Impedance*
Minimum Impedance7.6 ohm @ 2.3 kHz
Power Rating**50 W (EIA-426A)
Usable Frequency Range2500Hz-20kHz
Recommended Crossover2.5 kHz / 18 dBkHz
Magnet MaterialFerrite
Magnet Weight12oz, 0.34kg
Voice Coil Diameter1.3" / 33mm
Voice Coil FormerAluminum
Diaphragm MaterialTitanium
DC Resistance (Re)6.7Ω
Mounting Information
Overall Diameter3.5", 88.9mm
Driver Volume Displaced9.00E+ cu.ft., 0.26 liters
Depth2", 50.8mm
Weight1.7 lbs, 0.8 kg
Mounting ThreadN/A
Mounting Holes Diameter2X M6
Mounting Holes B.C.D.3 in. 76.2 mm

* Please consult for specifications of models with alternative impedances.

** Multiple units exceed published rating evaluated under AES noise source and test standard while mounted on the H290 or H290S horn in a non-temperature controlled environment.

*** The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance | LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle | 2ft x 2ft baffle is built into the wall with horn front mounted | Carver PM-120 amplifier | 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).