Eminence - The Art and Science of Sound

PSD:3006

SPECIFICATION

Throat Size

2" 50.8mm

Nominal Impedance

8 ohms

Power Rating **

80W(AES500 spec w/xover >500Hz, exc. 24dB/octave)

115W(AES800 spec with 800Hz x-over @ 12dB/octave)

Resonance

511Hz

Usable Frequency Range

500Hz-18kHz

Sensitivity***

111.4dB (@1W/1m across 500Hz-18kHz)

Magnet Weight

80 oz.

Voice Coil Diameter

3", 76.2mm

THIELE & SMALL PARAMETERS

DC Resistance (Re)

4.8

Download PDF Spec Sheet

MOUNTING INFORMATION

The PSD:3006 is only available as bolt-on.

Overall Diameter

7.9", 200.7mm

Mounting Holes Diameter

#4 (1/4-20)

Mounting Holes B.C. D.

4.0", 101.6mm

Depth

3.1", 78.7mm

Weight

13.5 lbs

MATERIALS OF CONSTRUCTION

Diaphragm Material

Titanium w/ geodesic design for increased strength and stiffness

Magnet Composition

Ferrite

FOOTNOTES


**	Multiple units exceed published rating evaluated under AES500 and AES800 noise sources and test standards while mounted on Eminence's TI-2000 horn in a non-temperature controlled environment.
***	The average on axis output across the usable frequency range when applying 1W/1m into the nominal impedance, i.e. 2.83V/8Ω, 4V/16Ω. Eminence response curves are measured under the following conditions: All speakers are tested at 1W/1m using a variety of test set-ups for the appropriate impedance \| LMS using 0.25" supplied microphone (software calibrated) mounted 1m from wall/baffle \| 2ft x 2ft baffle is built into the wall with horn front mounted \| Carver PM-120 amplifier \| 2700ft3 chamber with fiberglass on all six surfaces (three with custom-made wedges).