Each Eminence Professional model can be identified by its cast aluminum Eminence chassis that is lightweight and strong. Aluminum does not conduct the magnetic field out of the gap, thereby making the motor strength higher and the stray magnetic field lower. We coat each chassis and all metal components with an epoxy-acrylic finish using our in-house e-coat process. We can control the thickness of that coating to within 0.001”; critical when working with close tolerance transducer motor designs. We then add front and rear sealing gaskets on each model to accommodate front or rear loading.
There are 26 unique models available in our Professional series. Each was designed with a specific application in mind. From heavy-duty subwoofers, low distortion woofers, and super high-power woofers to lightweight neodymium transducers in truncated frames for line arrays, there is an Eminence Professional model for your application. Each product includes a lot of Made in the USA pride, along with a Seven Year Warranty against manufacturer’s defects*. With over 1,200 USA dealers and distributors worldwide you can easily find them in a store near you.
*Warranty policy may vary outside of the continental United States and Canada. Check with your local distributor for warranty details.
|Model Name||Image||Size||Voice Coil Diam.||Magnet Wt.||Power Rating||Sensitivity||Spec Sheet|
|DEFINIMAX™ 4012HO||12"||4", 101.6 MM||109 OZ.||600W||94 dB|
|DELTA PRO-12A||12"||2.5", 63.5 MM||80 OZ.||400W||99.2 dB|
|IMPERO™ 12A||12"||4", 101.6 MM||109 OZ.||1100W||93 dB|
|KAPPA PRO-12A||12"||3", 76.2 MM||80 OZ.||500W||97.1 dB|
|LAB12||12"||2.5", 63.5 MM||160 OZ.||400W||89.2 dB|
|LAB12C||12"||2.5", 63.5 MM||160 OZ.||500W||88.9 dB|